Electrical Scope of Work Template

Coordinate your project's electrical systems with precision. Use this interactive checklist to define requirements for power, lighting, and low-voltage systems.

Scope Builder

Click any text to edit. Add or remove items to customize for your project.

Electrical Scope of Work

CSI Division: 26 00 00

From (General Contractor)

Company Name

Project Manager

Phone

To (Subcontractor)

Subcontractor Company

Project Details

Project Name / Address

Date

Project Narrative / Overview

1. General Requirements

Provide all labor, materials, equipment, and supervision for a complete electrical system.
Obtain and pay for all electrical permits and schedule required inspections.
Coordinate with the local utility company for service entrance and meter location.
Provide and install temporary power and lighting for construction use.
Submit a complete fixture schedule for approval prior to ordering.
Maintain a clean workspace; remove all wire scraps and debris daily.
Warranty all work and components for one (1) year from substantial completion.

2. Service Entrance & Distribution

Install main service panel and all necessary sub-panels per plan.
Provide and install all circuit breakers, properly sized and labeled.
Install meter base and service mast/lateral per utility requirements.
Provide and install grounding system, including rods and water pipe bonds.
Install whole-house surge protection at the main panel.

3. Rough-In (In-Wall)

Layout and install all outlet, switch, and junction boxes per plan and code.
Run all branch circuit wiring (Romex/MC Cable) for lighting and power.
Provide dedicated circuits for high-demand appliances (Range, Dryer, HVAC, Pumps).
Install recessed lighting housings (cans) and rough-in brackets for speakers.
Install rough-in for smoke and carbon monoxide detectors (hardwired with battery backup).
Install all necessary conduit and sleeves for wall penetrations.
Fire-seal all electrical penetrations through rated walls and floors.

4. Finish / Trim-Out

Install all switches, dimmers, and receptacles (GFCI/AFCI as required).
Supply and install all light fixtures and ceiling fans per schedule.
Install cover plates on all boxes (matched to room finish).
Make final connections to all appliances and HVAC equipment.
Install and test all smoke and CO detectors.
Provide a typed and accurate circuit directory for all panels.
Perform a final walk-through to ensure all devices are operational.

5. Low Voltage & Systems (Optional/Specific)

Rough-in and trim for Data/CAT6 and Cable TV locations.
Install wiring for security system sensors and keypads.
Install doorbell system (wired or video doorbell transformer).
Rough-in for surround sound or multi-room audio speakers.
Install smart home hub and integrated lighting controls if specified.

6. Specific Exclusions

Utility company fees for service connection.
Supply of decorative light fixtures (if Owner-supplied).
Patching of drywall or paint after electrical installation.
Low voltage system programming (by Specialist).
Wiring of equipment supplied by others (unless specifically noted).

Export your Scope

Ready to include this in your contract?

Building a Comprehensive Electrical Scope

The electrical package is often one of the most complex parts of a residential or light commercial build. Misunderstandings regarding fixture locations, dimming requirements, or appliance circuits can lead to costly rework.

Critical Coordination Points

Fixture Ownership: Clearly define if the electrician is providing the fixtures or just the labor to install owner-supplied units.
Low Voltage Integration: Ensure there is no confusion between the electrician and a third-party AV or security contractor regarding who runs the data lines.
Appliance Coordination: Verify that the electrician has the submittal sheets for specialized appliances (like high-end ranges or steam showers) before rough-in.
Labeling: A well-labeled panel is the mark of a professional. Make it a required line item.

"Clarity at rough-in saves a thousand headaches at trim."